If you are not in the country shown, please select your country to be directed to the correct store.


A vaporizer is a device used to heat up dry herbs to a temperature, where active ingredients are released into an inhalable vapor. Good Vaporizers offer a precise temperature control to avoid combustion of the plant material.

What are the benefits of using a Vaporizer?

Vaporizers are a healthier alternative to combustion and smoking. Smoking burns plant material and produces toxic combustion byproducts which can be harmful when inhaled. Vaporizers, on the other hand, usually use electronically controlled heaters to ensure an extraction of active ingredients below combustion temperatures. Since there is no combustion, the original structure of the plant material is not destroyed but stays intact. This makes it possible to extract active ingredients from the plant over several sessions. There are studies (conducted with the VOLCANO) showing that vaporization is even more efficient than smoking.

Furthermore, a vaporizer with full temperature control gives you the possibility to “experiment” with different temperature settings and find the temperature you are most comfortable with. At lower temperatures, a Vaporizer will deliver smooth vapor and make inhalation more comfortable and less harsh on the throat.

What makes STORZ & BICKEL Vaporizers special?

We have been one of the first companies in this field and have gathered a lot of consumer insights within the past 20 years. The founders of our company, Markus and Jürgen shared the mindset of our customers and understood what separates a good Vaporizer from a not-so-good one. They have always been the first “customers” to try newly developed devices and judge their performance – and they have always had high standards.

Our guiding principle has always been to put the quality and functionality of the devices first. An S&B Vaporizer is built to last and, more importantly, to satisfy. 

What makes & BICKEL Vaporizers special?

For us, it’s all about the overall vaporization experience, from the comfort of a low draw resistance and the quality and purity of the vapor to an intuitive use and easy cleaning. A good Vaporizer must deliver in every aspect and we don’t accept compromises.  

Our first Vaporizer, the VOLCANO CLASSIC has been on the market for 20 years and is still considered one of the best performing Vaporizers. Our portable vaporizers, the MIGHTY and the CRAFTY revolutionized the marked when they were launched in 2014 and are still the benchmark for every new Vaporizer entering the market. But what exactly makes them so great?

But what exactly makes them so great?


Convection Vs. Conduction Heating


Draw Resistance


Quality Standards

1. Convection Vs. Conduction Heating

The VOLCANO was the first Vaporizer Markus Storz developed. Inspired by a heat gun, Markus developed a heating system using convection heating, meaning hot air. In the VOLCANO, a pump is used to blow hot air through the herbs in the Filling Chamber. The advantage of the convection heating is that the hot air will flow through the little gaps in between the ground herbs and heat up the material evenly and efficiently, giving you big vapor clouds.

The pure convection heating in the VOLCANO delivers smooth, clean vapor and a pure taste. This is why the VOLCANO CLASSIC is loved by many – a balloon from the VOLCANO CLASSIC is in a class of its own.

The PLENTY, the MIGHTY and the CRAFTY(+) use a combination of conduction and convection heating. Other than the VOLCANO, these are devices you pull air through with your lungs to create vapor. The downside of a pure convection heating is that it takes a few seconds until the herbs in the Filling Chamber are heated up and you would get little to no vapor from your first draw. A pure conduction heating, on the other hand, usually does not vaporize the plant material evenly. 

As a consequence, you’d have to stir the herbs in the chamber every now and then and the vapor production is not as satisfying as with a convection heater. To solve this problem, Markus invented a patented heating technology which combined convection and conduction. The conduction heating makes sure that the Filling Chamber and the herbs are preheated, while the convection heating ensures an even and efficient vaporization.

2. Draw Resistance

It has always been a paramount design requirement to make inhalation as pleasant and smooth as possible. This is particularly important in the portable vaporizers, which allow an airflow of up to 10l per minute. In the same time, it is equally challenging to realize a good airflow while keeping the device small.

A low draw resistance means that you can draw more air through the device within an inhalation. The bigger the airflow, the more efficient the heater must be, the more power is needed and the more efficient the cooling of the vapor must be. This also puts higher demands towards power and heat management of the vaporizer and affects material choices and the overall design.

3. Quality Standards

We are a certified Medical Device Manufacturer following ISO 13485. Our household Vaporizers follow the same quality control processes as our medical devices. Our Vaporizers are manufactured in Tuttlingen, Germany, a town with over 500 Medical Device Manufacturers. Accordingly, we have a great network of certified local suppliers. Around 85% of our suppliers are based in Germany and 20% are local suppliers based in or around Tuttlingen. The proximity facilitates quality controls and makes communication and interventions fast and easy.

Every single S&B Vaporizer goes to a final testing, where we test temperature ranges, temperature control, the air pump in VOLCANOs and perform a high-voltage test. Furthermore, each vaporizer undergoes a “first-flow” where we pump hot air through the devices for a number of minutes to get rid of any manufacturing smell. 

The following pages and information
are directed only towards adults!

You must be older than 19 years old to enter this page.
Search engine powered by ElasticSuite